How to Make a 3D Heart Box
- Insert a Solid Box.
- Grab one of the bottom corners and click into the number box to make each side 50.00.
- Grab the top of the Solid Box and change the height to 30.00.
- Insert a Non Solid Box (The grey box with the lines).
- Grab one of the bottom corners and click into the number box to make each side 40.00.
- Grab the top of the Nonsolid Box and change the height to 30.00.
- Grab the black triangle above the Nonsolid Box and lift it up so it is floating 5.00 above theworkplane.
- Grab the Nonsolid Box and center it in the middle of the Solid Box.
- Click and drag to highlight both Boxes and then press ctrl+G to group the two objects together.
- Insert another Solid Box.
- Grab one of the bottom corners and click into the number box to make each side 50.00.
- Grab the top of the Solid Box and change the height to 15.00.
- Click on the Solid Box and press ctrl+D to make a second Solid Box.
- Grab one of the bottom corners of this new Solid Box and click into the number box to make each side 39.00.
- Grab the black triangle above the smaller Solid Box and lift it up so it is floating 4.00 above the workplane.
- Grab the smaller Solid Box and center it in the middle of the Solid Box.
- Click and drag to highlight both Boxes and then press ctrl+G to group the two objects together.
- Grab the double sided arrow above the combined Solid Boxes and rotate it to -180 degrees.
- Click on the basic shapes drop down and select all.
- Scroll down to the bottom and go to page 14. Scroll up and insert the Heart.
- Grab one of the bottom corners of the Heart and make it 35.00 by 40.00.
- Grab the black triangle above the Heart and lift it up so it is floating 16.00 above the work plane.
- Grab the Heart and center it in the middle of the Solid Boxes that are joined together.
- Click and drag to highlight Heart and the Solid Boxes and then press ctrl+G to group the objects together.
Congratulations you have just finished designing your very own 3D Heart Box
